Painted stainless steel bike trailer hitch for Burley trailers, durable and solid. Works with disc brake and full suspension bikes
Fits QR axles and solid axles up to 12mm (OD=0.48in).
12mm Thru-Axles will require Burley s adapted Thru-Axle. This replacement axle has external threading to accommodate the installation of our axle mounted hitches.
If you are upgrading from a Classic Hitch to this Steel Hitch, you will also need a Flex Connector. (Flex Connector not included, but you can find it in our store.)
Warning: Can not fit with Breezer style dropouts.
Our trailer hitch are made of strong stainless steel and well finished No burr ! Products from other ‘s may looked like ours in picture, but they actually not! Product it self don’t tell lie. ODIER Bike Trailer Hitch
How to Install the Hitch
1. Open the quick release lever, and remove the nut and spring from the opposite side. Hold the lever and pull the axle skewer with spring out. Completely remover the skewer but leave the wheel in place.
2. Slide the hitch onto the skewer. (The wide end of the spring should face out and touch the lever, the bell of the hitch should face out.)
3. Insert the end of the skewer through the wheel hub and. Replace the spring (wide end out!) over the end of the skewer,followed by the nut.
4. Adjust the hitch to a right angle and tighten the nut by hand and clamp the lever. Connect the trailer with the coupler by a Q/R pin.
About the hitch
Painted stainless steel bike trailer hitch for Burley trailers, durable and solid. Works with disc brake and full suspension bikes
Fits QR axles and solid axles up to 12mm (OD=0.48in).
12mm Thru-Axles will require Burley s adapted Thru-Axle. This replacement axle has external threading to accommodate the installation of our axle mounted hitches.
If you are upgrading from a Classic Hitch to this Steel Hitch, you will also need a Flex Connector. (Flex Connector not included, but you can find it in our store.)
Warning: Can not fit with Breezer style dropouts.
Our trailer hitch are made of strong stainless steel and well finished No burr ! Product it self don’t tell lie, try ours and you’ll find it just as good as the original!
Related Accessories
Safety Strap
If the original obvious aging or torn. You may need this replacement part.
Felx Connector for Round Tow Arm
If you upgrade from a classic hitch you may need this.
If your original flex connector is too hard or be used over 2 years, you need this too.
(Other trailer brands may match this connector if the tow arm tube size between 21.5mm to 23.5mm.)
Felx Connector for Square Tow Arm
If you upgrade from a classic hitch you may need this.
If your original flex connector is too hard or be used over 2 years, you need this too.
(Other trailer brands may match this connector if the tow arm tube size between 23.5mm to 25.5mm.)
Make sure all part connected right before towing
Please make sure all accessories are connected correctly before use.
Flex connector for round tow arm
Flex connector for square tow arm
Hitch with Strap
Flexl connector and hitch kit for round
Hitch with flex connector and strap
2 pack hitch
Compatible with Burley Trailers