Disc Brake Kit

Manufacturer Part Number:E6K-T1
This kit Includes everything to put brakes on your 6,000 lb tandem axle trailer with: (4) 12″ dacromet coated Integral vented rotor and dacromet coated steel caliper, model HBA-16 1,600 psi disc brake actuator with built in electric reverse back-flow solenoid, 15′ NiCopp flexible brake line kit, and mounting hardware.

The rotors will come with bearings and grease seals.

ROTOR DIAMETER: 12″
REPLACES DRUM DIAMETER: 12″
BEARING SIZE: 1-3/4″ x 1-1/4″, 25580 x 15123
GREASE SEAL: Double Lip – ID 2.25″ / OD 3.376″
# OF STUDS: 6
BOLT CIRCLE: 5-1/2″ (15″ and 16″ Wheels)
AXLE RATING: 6,000 lbs.

The brake line kit includes:
(1) 188″ Long brake line with 3/8″-24 inverted flare nuts.
(1) 76″ Long brake line with 3/8″-24 inverted flare nuts.
(2) 48″ Long brake line with 3/8″-24 inverted flare nuts.
(4) 21″ Male/male rubber flex lines with 3/8″-24 inverted flare nuts.
(1) 3/8″ Brass T-fitting.
(1) 3/8″ Brass 4-Way-fitting.
(2) 3/8″ Brass union fitting.
1/2″ Nylon hose clamps.
1/4″ Nylon hose clamps.
Self-tapping screws.
NiCopp has the strength and structural integrity of steel lines but with the added benefit of being much more corrosion resistant.

Brake Acutator Features Include:
? Only four wires to connect, 3 wires go to the tow vehicle receptacle, the fourth goes to the breakaway switch.
? Works in reverse, no more pins to insert before backing up.
? Eliminates brake drag common with surge actuators on down hill grades.
? installs on trailer with minimal wiring.
? Meets or exceeds DOT brake actuator regulations.
? Unit mounted bleeder makes bleeding the brake lines easier.
? Engages trailer brakes when tow vehicle brake pedal is applied or when the in cab controller override is activated.
? Water tight extruded aluminum enclosure protects the unit in all weather conditions Regulatory Compliant.
? Fully compliant with CFR-393 federal braking requirements.
? Includes detailed instruction manual.
Note that the tow vehicle must be equipped with an industry standard electronic brake controller.

Specifications:
? Application: Disc brakes
? Maximum output pressure: 1,600 psi
? Vehicle requires an In-cab electric brake controller (sold separately) and a 7-Way trailer connector.
? Dimensions: 11-3/4″ long x 3″ wide x 7-3/8″ tall